Mitsubishi Electric MELSEC iQ-F FX5 - 32.2 Operations of Control Method; No Positioning

514
32 TABLE OPERATION
32.2 Operations of Control Method
32.2 Operations of Control Method
The following describes the control method that can be set in a table.
For details of each table operation instruction, refer to Page 419 POSITIONING INSTRUCTION.
No Positioning
The following describes control method [0: No Positioning].
Setting data
The following table shows the operand assignment.
Processing details
This table unconditionally turns on the positioning complete flag and ends the table operation instruction. This control method
cannot be executed before the other positioning types.
If a table that is not set with a parameter (empty table) is specified, control method [0: No Positioning] is applied.
Precautions
• If a table with this positioning type is included between the first table and last table when multiple tables are executed such
as continuous operation, tables that follow the table with control method [0: No Positioning] do not operate.
• The complete flag turns on after the operation of the previous table is decelerated to a stop and the dwell time elapses.
• When user devices are used, devices assigned to a table of control method [0: No Positioning] (first device +0 to +5) are
not used in table operation. Users can use such devices for any purpose.
Related devices
Related devices of axis 4 are available only for the FX5S/FX5U/FX5UC CPU module.
■CPU module
■High-speed pulse input/output module
Item Operand 1 Operand 2 Operand 3 Operand 4
Description None None None None
Range 
Details None None None None
Axis 1 Axis 2 Axis 3 Axis 4 Name High
Speed I/O
Parameter
R/W Reference
SM8029 (FX3 compatible device) Instruction execution complete flag  R Page 417
SM8329 (FX3 compatible device) Instruction execution abnormal end flag  R
R: Read only, : Not supported
First module Second module Third module Fourth module Name High
Speed I/O
Parameter
R/W Reference
Axis 5 Axis 6 Axis 7 Axis 8 Axis 9 Axis 10 Axis 11 Axis 12
SM8029 (FX3 compatible device) Instruction execution
complete flag
 R Page 417
SM8329 (FX3 compatible device) Instruction execution
abnormal end flag
 R
R: Read only, : Not supported