678
35 CPU MODULE BUILT-IN ANALOG FUNCTION
35.9 Parameter Setting
35.9 Parameter Setting
Set the parameters of each channel.
Setting parameters here eliminates the need to program them.
Parameters are enabled when the CPU module is powered ON or after a reset. In addition, operations
different from the parameter settings are possible by transferring values to special relays and special registers
while changing these values in the program.
Refer to Page 685 Special Relay List or Page 719 Special Register List for details on the special
relays and special registers.
Basic settings (Analog input)
Setting procedure
Open "Basic Settings" of the GX Works3.
1. Start Module parameter.
Navigation window [Parameter] Module model name [Module Parameter] [Analog Input] [Basic Settings]
2. Click the item to be changed to enter the setting value.
• Item where a value is selected from the pull-down list
Click [] button of the item to be set, and from the pull-down list that appears, select the value.
• Item where a value is entered into the text box
Double-click the item to be set to enter the numeric value.
Item Description Setting range Default
A/D Conversion Enable/Disable
Setting
Set whether to "enable" or "disable" A/D conversion value output. • Enable
• Disable
Disable
Average Processing Specify Execute whether to set "average process" or "sampling
processing".
• Sampling
• Time Average
• Count Average
• Moving average
Sampling
Time Average Counts Average
Moving average
Set time average, count average, moving average counts during
specifying average process for each channel.
User-defined value for the
allowable setting range
0
To Next Page
Loading...
