16 RAS FUNCTIONS
16.1 Self-Diagnostics Function
137
16
Error clear
This function clears all the existing continuation errors at once.
Errors that can be cleared
Error code Error name
1080H ROM write count error
1090H Battery error
1120H SNTP clock setting error
1200H Module moderate error detected
1800H Annunciator ON
1810H, 1811H Operation error
1900H Constant scan time error
1920H IP address setting error
1921H IP address writing/clear request simultaneous detection
1FE0H to 1FE6H, 2008H Module configuration error
2120H, 2121H Memory card error
2400H Module verification error
2440H, 2441H Module major error
2450H Module major error detected
2522H Invalid interrupt
2801H Module specification error
2820H, 2821H, 2822H, 2823H Device specification error
2840H File name specification error
3360H to 3362H Nesting depth error
3380H Pointer execution error
3400H to 3406H, 3420H, 3500H, 3502H to 3506H, 350AH, 350CH to 350FH,
3510H to 351EH, 3580H, 3581H, 3583H to 3588H, 3600H, 3611H to 361CH,
3621H to 362CH, 3631H to 363CH, 3641H to 364CH, 3651H to 365CH,
3661H to 366CH, 3671H to 367CH, 3681H to 368CH, 3691H to 369CH,
36A1H to 36ACH, 36B1H to 36BCH, 36F0H
Operation error
3780H High-speed comparison table maximum excess error
3781H Preset value range outside error
To Next Page
Loading...
