19 DATA LOGGING FUNCTION
19.7 SD Memory Card Life and Replacement
195
19
Operations after SD memory card replacement
If the SD memory card was replaced while data logging was running based on the data logging setting file contained in the SD
memory card, the data logging setting file contained in the new SD memory card is used when data logging is started next. If
the new SD memory card does not contain the data logging setting file, data logging is not started.
Stack file remaining in the replaced SD memory card
Replacing an SD memory card that contains a stack file may result in the stack file remaining in the replaced SD memory card
along with storage files. If the stack file is remaining in the replaced SD memory card, recover the latest data contained in the
stack file by doing the following:
• Retrieve the data from the stack file and combine the data with a storage file.
• Save the stack file as a storage file.
To Next Page
Loading...
