Mitsubishi Electric MELSEC iQ-F FX5 - Page 321

25 HIGH-SPEED INPUT/OUTPUT FUNCTION
25.4 Pulse Catch Function
319
25
Displayed items
■High-speed pulse input/output module
Add the high-speed pulse input/output module.
High-speed pulse input/output module is supported for FX5UJ/FX5U/FX5UC CPU modules.
Navigation window  [Parameter]  [Module Information]  Right-click  Add New Module
After adding the high-speed pulse input/output module, make settings on the screen displayed from the following operation.
Navigation window  [Parameter]  [Module Information]  [1 to 16 (high-speed pulse input/output module)] 
[Module Parameter]  "Input Function"  "General/Interrupt/Pulse Catch"  "Detailed Setting"
Window
Shown above is the screen at the time when the first high-speed pulse input/output module is selected.
Displayed items
Parameters are enabled when the CPU module is powered ON or after a reset.
Item Description Setting range Default
General/Interrupt/Pulse
Catch
Set the function to be used.
Set to "Interrupt (Rising) + Pulse Catch".
• General-purpose Input
• Interrupt (Rising)
• Interrupt (Falling)
• Interrupt (Rising + Falling)
• Interrupt (Rising) + Pulse Catch
General-purpose
Input
Item Description Setting range Default
General/Interrupt/Pulse
Catch
Set the function to be used.
Set to "Interrupt (Rising) + Pulse Catch".
• General-purpose Input
• Interrupt (Rising)
• Interrupt (Falling)
• Interrupt (Rising + Falling)
• Interrupt (Rising) + Pulse Catch
General-purpose
Input
Interrupt Pointer Set the interrupt pointer (I) which is assigned to each input.
The pulse catch function does not use an interrupt pointer.
I50 to I177 