Mitsubishi Electric MELSEC iQ-F FX5 - Page 357

28 SPECIFICATIONS
28.3 Output Specifications
355
28
■FX5-16ET/ES-H
*1 To ground the unit, refer to the servo amplifier (drive unit) manual.
If the grounding method is not specified, carry out class-D grounding (grounding resistance: 100  or less).
Source internal output circuit
■FX5S/FX5UJ/FX5U CPU module
*1 To ground the unit, refer to the servo amplifier (drive unit) manual.
If the grounding method is not specified, carry out class-D grounding (grounding resistance: 100  or less).
*2 For MELSERVO series servo amplifiers, use a sink output type FX5U CPU module.
■FX5UC CPU module
*1 To ground the unit, refer to the servo amplifier (drive unit) manual.
If the grounding method is not specified, carry out class-D grounding (grounding resistance: 100  or less).
*2 For MELSERVO series servo amplifiers, use a sink output type FX5UC CPU module.
Y
Y+4
COM
FX5-16ET/ES-H
Pulse train signal
Direction signal
*1
Servo amplifier
(Drive unit)
Grounding
5 to 24 V DC
Pulse train signal
Direction signal
*1
Servo amplifier
(Drive unit)
Y0
+V0
Y4
+V1
CPU module
Grounding
5 to 24 V DC
*2
*1
Y0
Y4
+V0
FX5UC CPU module
*2
Pulse train signal
Direction signal
Grounding
5 to 24 V DC
Servo amplifier
(Drive unit)