Mitsubishi Electric MELSEC iQ-F FX5 - Page 763

APPX
Appendix 2 Special Register List
761
A
SD10298 Time setting function required response time A time required from sending the message to
the SNTP server to receiving the response and
setting the time to the CPU module is stored.
Range: 0000H to FFFEH (Unit: ms)
If the value exceeds the above range, all the
values are stored as FFFFH.
When the communication fails, this device is not
updated.
R
SD10299 Time setting function execution This turns ON when the time setting function is
executed.
This automatically turns OFF when the time
setting is completed or time out occurs in
communication.
0: No execution request
1: Execution requested
R/W
SD10320 Connection 1 continuous unlock failure number
of times
This register stores the connection 1 continuous
unlock failure number of times.
R
SD10321 Connection 2 continuous unlock failure number
of times
This register stores the connection 2 continuous
unlock failure number of times.
R
SD10322 Connection 3 continuous unlock failure number
of times
This register stores the connection 3 continuous
unlock failure number of times.
R
SD10323 Connection 4 continuous unlock failure number
of times
This register stores the connection 4 continuous
unlock failure number of times.
R
SD10324 Connection 5 continuous unlock failure number
of times
This register stores the connection 5 continuous
unlock failure number of times.
R
SD10325 Connection 6 continuous unlock failure number
of times
This register stores the connection 6 continuous
unlock failure number of times.
R
SD10326 Connection 7 continuous unlock failure number
of times
This register stores the connection 7 continuous
unlock failure number of times.
R
SD10327 Connection 8 continuous unlock failure number
of times
This register stores the connection 8 continuous
unlock failure number of times.
R
SD10337 MELSOFT communication port (UDP/IP)
continuous unlock failure number of times
This register stores the MELSOFT
communication port (UDP/IP) continuous unlock
failure number of times.
R
SD10338 MELSOFT communication port (TCP/IP)
continuous unlock failure number of times
This register stores the MELSOFT
communication port (TCP/IP) continuous unlock
failure number of times.
R
SD10339 FTP transmission port (TCP/IP) continuous
unlock failure count
This register stores the FTP transmission port
(TCP/IP) continuous unlock failure count.
R
SD10340 MELSOFT direct connection continuous unlock
failure number of times
This register stores the MELSOFT direct
connection continuous unlock failure number of
times.
R
SD10350 Request to start communication Request contact to start data communication
when the communication setting for the simple
CPU communication is "Request"
[b0] to [b15]: Setting No.1 to Setting No.16
0 to 1: Requested (start request)
To make start request again, first stop the
request and then make start request.
R/W
SD10351 Request contact to start data communication
when the communication setting for the simple
CPU communication is "Request"
[b0] to [b15]: Setting No.17 to Setting No.32
0
to 1: Requested (start request)
To make start request again, first stop the
request and then make start request.
R/W
No. Name Description Compatible CPU module R/W
FX5S FX5UJ FX5U/
FX5UC