Mitsubishi Electric MELSEC iQ-F FX5 - Page 866

864
APPX
Appendix 8 How to Use CPU Module Logging Configuration Tool
■Write logging setting
The following procedure is to write the data logging setting to the target memory.
Operating procedure
1. Open the "Write Logging Setting" window.
[Online]  [Write Logging Setting]
2. Select the memory where the data to be written is stored from "Target memory" list.
3. Select the checkbox in the "Target logging setting data" list corresponding to the data item to be written, and click the
[Write] button.
Setting data
Displayed items
Any existing data (data logging setting with the same setting number or common setting) on the target is
overwritten.
Item Description
Target memory Select the memory where the data to be written is stored.
Target logging setting data Select the data to be written.