111
CHAPTER 4 FUNCTIONS
4
4.3 IP Packet Transfer Function
4.3.2 How to set the IP packet transfer function
(2) Setting procedure
For a communication example, refer to Page 118, Section 4.3.6
(a) Setting in the CPU module
1. Open the "Q Parameter Setting" window to set the
IP address.
Project window [Parameter] [PLC
Parameter] "Built-in Ethernet Port Setting"
Follow the rules to set the IP address. ( Page 109,
Section 4.3.2 (1))
2. Click the button. Then select
"Use".
To Next Page
Loading...
