193
CHAPTER 6 PARAMETER SETTING
6
6.3 Network Range Assignment
6.3.2 LX/LY settings
(1) Specify I/O master station
Set an I/O master station for each block to perform communication using LX/LY.
1. Select a desired block in [Switch screens] to specify an I/O master station.
2. Selecting a station No. and clicking the button will set the station as I/O master station.
Up to two I/O master stations can be set for one network (block 1 and block 2), regardless of the status of control or normal
station.
To Next Page
Loading...
