Mitsubishi Electric MELSEC-Q Series - Page 272

270
(b) Network range assignment
In the program example in this section, each station send range of LB/LW is assigned 512 points.
Use the default setting for the supplementary setting.
1. Fill in the network range assignment parameter sheet and the supplementary setting parameter
sheet. ( Page 652, Appendix 5.3)
Ex.
Control station (No. 1)
LB0 to LB1FF
LB200 to LB3FF
LB400 to LB5FF
LB600 to LB7FF
No.1 send range
No.2
No.3
No.4
No.1
No.2 send range
No.3
No.4
No.1
No.2
No.3 send range
No.4
No.1
No.2
No.3
No.4 send range
LW0 to LW1FF
LW200 to LW3FF
LW400 to LW5FF
LW600 to LW7FF
No.1 send range
No.2
No.3
No.4
No.1
No.2 send range
No.3
No.4
No.1
No.2
No.3 send range
No.4
No.1
No.2
No.3
No.4 send range
LB
LW
Control station
No.1
Normal station
No.2
Normal station
No.3
Normal station
No.4
(a) LB setting
Network No.
Total Stations
System Switching Monitoring Time
Data Link Monitoring Time
ms
ms
Parameter Name
Station No.
Link relay (LB)
Number of points Data description
1
LB
points
points
points
points
to
LB to
LB to
LB to
2
3
4
(1) LB/LW setting [(1)/(2)]
Pairing Shared group