271
CHAPTER 8 PROGRAMMING
8
8.1 Program Example of a Single Network System
8.1.2 Setting and communication contents
2. Complete settings in the programming tool based on the contents filled in the parameter sheet.
• Network range assignment (Control station (No. 1))
• Supplementary setting (Control station (No. 1))
Item Setting contents
Constant Link Scan ms (Range: 1 to 500)
Block Data Assurance per
Station
Block data assurance per station is
available
Checked
Not checked
Transient Setting
Punctuality is guaranteed
Checked
Not checked
Maximum No. of Transients in One
Station
times (Range: 1 to 10)
To Next Page
Loading...
