Mitsubishi Electric MELSEC-Q Series - Page 609

607
APPENDICES
A
Appendix 3 Functional Upgrade of CC-Link IE Controller Network
(2) For High Performance model QCPUs
—: Irrelevant to serial No. or software version
*1 Station No.1 to No.64 can be set. When a High Performance model QCPU is a control station, however, the total
number of stations per network is up to 64.
Function
First 5 digits of serial No.
Programming tool
version
Reference
section
CC-Link IE
Controller
Network
module
CPU
module
GX
Developer
GX Works2
Compatible with Q02/Q02H/Q06H/Q12H/Q25HCPU 09011 or later
09012 or later
Version 8.45X
or later
Version 1.04E
or later
Page 40,
Section 2.3
Total number of stations per network increased to
120
*1
09042 or later
Version 8.48A
or later
Page 34,
Section 2.1.1
External power supply function
Page 134,
Section 4.4.7
Link dedicated instructions added
• SEND/RECV/RECVS/ZNRD/ZNWR/RRUN/RSTOP/
RTMRD/RTMWR
——
Page 324,
CHAPTER 9
Modified CC IE Control diagnostics
• Acquisition of normal connection information
Version 8.48A
or later
Version 1.04E
or later
Page 528,
Section 10.3.1
Compatible with Redundant CPUs
• Pairing setting for redundant systems
Function
version D or
later
10042 or later
Version
8.68W or later
Not available
Page 138,
Section 4.7.1
Points for link dedicated instructions
(READ/SREAD/WRITE/SWRITE) increased to 8192
words
• Channels 9 and 10 specified for use of the own
station
• Read/write data length specified to 961 words or
more
—
——
Page 324,
CHAPTER 9
Modified CC IE Control diagnostics
• Display of stations with no parameter setting
Version
8.68W or later
Version 1.04E
or later
Page 528,
Section 10.3.1
Supporting transient requests from CC-Link IE
Controller Network compatible devices, and new CC-
Link dedicated instructions added
• RIRD/RIWT
10092 or later — —
Page 324,
CHAPTER 9
Increase of send points by mounting multiple network
modules of the same network No.
—
Version 8.76E
or later
Version 1.07H
or later
Page 84,
Section 4.1.9