608
(3) For Process CPUs
—: Irrelevant to serial No. or software version
*1 The Q02PH/Q06PHCPU is available from the first released products.
Function
First 5 digits of serial No.
Programming tool
version
Reference
section
CC-Link IE
Controller
Network
module
CPU
module
GX
Developer
GX Works2
Compatible with Q02PH/Q06PHCPU
Function
version D or
later
—
Version
8.68W or later
Not available
Page 40,
Section 2.3
Compatible with Q12PH/Q25PHCPU 10042 or later
Compatible with Redundant CPUs
• Pairing setting for redundant systems
10042 or
later
*1
Page 138,
Section 4.7.1
Points for link dedicated instructions
(READ/SREAD/WRITE/SWRITE) increased to 8192
words
• Channels 9 and 10 specified for use of the own
station
• Read/write data length specified to 961 words or
more
—
——
Page 324,
CHAPTER 9
Modified CC IE Control diagnostics
• Display of stations with no parameter setting
Version
8.68W or later
Not available
Page 528,
Section 10.3.1
Supporting transient requests from CC-Link IE
Controller Network compatible devices, and new CC-
Link dedicated instructions added
• RIRD/RIWT
10092 or later — —
Page 324,
CHAPTER 9
Increase of send points by mounting multiple network
modules of the same network No.
—
Version 8.76E
or later
Not available
Page 84,
Section 4.1.9
To Next Page
Loading...
