628
(2) Comparison of link special register (SW)
Change the link special register (SW) in a sequence program referring to the following chart.
In addition, the link special register (SW) shown below is a list for a case when an assignment range is SW0000
to SW01FF.
(a) Comparison with the MELSECNET/H module
: compatible, : partially changed, —: incompatible
MELSECNET/H CC-Link IE Controller Network
Compatibility
Precautions for
replacement
No. Name No. Name
SW0000
Link stop/startup direction
content
SW0000
Link stop/startup direction None
SW0001 to
SW0004
SW0001 to
SW0008
SW0008
Logical channel setting
(channel 1)
——
—
Delete the sequence
program for the
corresponding part.
SW0009
Logical channel setting
(channel 2)
——
SW000A
Logical channel setting
(channel 3)
——
SW000B
Logical channel setting
(channel 4)
——
SW000C
Logical channel setting
(channel 5)
——
SW000D
Logical channel setting
(channel 6)
——
SW000E
Logical channel setting
(channel 7)
——
SW000F
Logical channel setting
(channel 8)
——
SW0018
System switching monitoring
time setting
——
SW001C Number of retries — —
SW001D Retry interval — —
SW001E Number of gates — —
SW0020 Module status SW0020 Module status None
To Next Page
Loading...
