Mitsubishi Electric MELSEC-Q Series - Page 631

629
APPENDICES
A
Appendix 4 Comparison Between CC-Link IE Controller Network and MELSECNET/H Appendix 4.3 Link special relays (SB) and link special registers (SW)
SW0031
ZNRD instruction processing
result
SW0030
ZNRD processing result
(No. changed)
None
Send/receive instruction (1)
processing result
Send/receive instruction (1)
processing result
SW0033
ZNWR instruction processing
result
SW0031
ZNWR processing result
Send/receive instruction (2)
processing result
Send/receive instruction (2)
processing result
SW0035
Send/receive instruction (3)
processing result
SW0032
Send/receive instruction (3)
processing result
SW0037
Send/receive instruction (4)
processing result
SW0033
Send/receive instruction (4)
processing result
SW0039
Send/receive instruction (5)
processing result
SW0034
Send/receive instruction (5)
processing result
SW003B
Send/receive instruction (6)
processing result
SW0035
Send/receive instruction (6)
processing result
SW003D
Send/receive instruction (7)
processing result
SW0036
Send/receive instruction (7)
processing result
SW003F
Send/receive instruction (8)
processing result
SW0037
Send/receive instruction (8)
processing result
SW0040 Network No. SW0040 Network No.
NoneSW0041 Group No. SW0041 Group No.
SW0042 Station No. SW0042 Station No.
SW0043 Mode status SW0043 Mode status
(Content
changed)
The content to be stored is
changed from the
MELSECNET/H module.
SW0044 Station setting SW0044 Station setting
SW0046 Module type SW0046 Module type
SW0047 Baton pass status (host) SW0047
Baton pass status (own
station)
SW0048
Cause of baton pass
interruption
SW0048
Cause of baton pass
interruption
SW0049 Cause of data link stop SW0049 Cause of data link stop
SW004A
Data linking stop request
station
SW004A
Data linking stop request
station
SW004B Host CPU status SW004B Own station's CPU status
SW004D Data linking stop status (host) SW004D
Data linking start status
(own station)
None
SW004F Data linking stop status (host) SW004F
Data linking stop status
(own station)
SW0051
Data linking start status (entire
system)
SW0051
Data linking start status
(entire system)
SW0053
Data linking stop status (entire
system)
SW0053
Data linking stop status
(entire system)
S
W0054 Parameter information SW0054 Parameter information
(Content
changed)
The content to be stored is
changed from the
MELSECNET/H module.
MELSECNET/H CC-Link IE Controller Network
Compatibility
Precautions for
replacement
No. Name No. Name