Mitsubishi Electric MELSEC-Q Series - Page 634

632
SW00A8
Online test execution
item/faulty station (requesting
side)
——
(Content
changed)
• Delete the sequence
program for the
corresponding part.
• The result of a test can be
checked by CC IE Control
diagnostics in the CC-
Link IE Controller
Network module.
SW00A9
Online test result (requesting
side)
——
SW00AA
Online test execution item
(responding side)
——
SW00AB
Online test result (responding
side)
——
SW00AC
Offline test execution
item/faulty station (requesting
side)
——
—
Delete the sequence
program for the
corresponding part.
SW00AD
Offline test result (requesting
side)
——
SW00AE
Offline test execution item
(responding side)
——
SW00AF
Offline test result (responding
side)
——
SW00B0 to
SW00B3
Multiplex transmission status
(1)
——
SW00B4 to
SW00B7
Multiplex transmission status
(2)
——
SW00B8
UNDER on the forward loop
side/coaxial bus UNDER
SW0068
SW0069
IN-side line error
occurrence rate (Max.)
IN-side line error
occurrence rate (present.)
(Content
changed)
• These operations in the
MELSECNET/H can be
substituted by IN-side line
error occurrence rate in
the CC-Link IE Controller
Network module.
• The station No. for the
station that receives an
error frame at IN-side can
be checked by SW0120
to SW0127 and SW0140
to SW0147.
SW00B9
CRC on the forward loop
side/coaxial bus CRC
SW00BA
OVER on the forward loop
side/coaxial bus OVER
SW00BB
Short frame on the forward
loop side/coaxial bus short
frame
SW00BC
Abort on the forward loop side
(AB,IF)/coaxial bus abort
(AB,IF)
SW00BD
Timeout on the forward loop
side (TIME)/ coaxial bus
timeout (TIME)
SW00BE
Receiving 2k bytes or more
on forward loop side
(DATA)/coaxial bus receiving
2k bytes or more (DATA)
SW00BF
DPLL error on the forward
loop side/coaxial bus DPLL
error
MELSECNET/H CC-Link IE Controller Network
Compatibility
Precautions for
replacement
No. Name No. Name