7 - 16
7.6 Grounding Extension Units
7.6.2 Wiring FG cable of CF card extension unit connection cable
2 Connect the ground cable of the connection cable with the GOT's ground cable to the FG terminal of the
GOT's power.
For GT155 , connect the ground cable of the connection cable to the FG terminal of the GOT's power,
and connect the GOT's ground cable to the protective ground terminal.
For connecting the ground cables, each flat side of the two solderless terminals must be faced.
3
For the ground cable of the connection cable, use the following solderless terminals.
For grounding the GOT, refer to the following.
7.2 Wiring to GOT Power Section
Applicable solderless
terminal
RAV1.25-3, V1.25-B3A, FV1.25-B3A
Ground cable
of connection
cable
Ground
cable of GOT
L N LG FG
Terminal
screw
Solderless
terminal
Shorting
bar
To Next Page
Loading...
