9 - 6
9.3 Utility Display
2 Touching the button restarts the GOT and the language on the utility is switched to the selected
one.
*1: Only selectable languages are displayed.
The selectable languages differ depending on the fonts installed in the GOT.
For details of the fonts, refer to the following manual.
GT Designer3 Version1 Screen Design Manual (Fundamentals) (2.5 Specifications of Applicable Characters)
GT Designer2 Version Screen Design Manual (2.3 Specifications of Applicable Characters)
When starting the GOT without selecting any language or the selected language and
the installed fonts are not matched
The following screen will be displayed.
Touching the button of a desired language restarts the GOT and the language is
switched to the selected one.
System language switching using the device
The system language can be switched using the system language switching device
set with GT Designer3.
For the setting method of the system language switching device, refer to the
following.
GT Designer3 Version1 Screen Design Manual (Fundamentals)
(4.3 Language Switching Device Setting)
To Next Page
Loading...
