9 - 12
9.3 Utility Display
9.3.3 Basic operation of settings change
3 If touch button without touching button, the dialogue mentioned below is displayed.
2 Keyboard operation
1 Touch the numerical value to be changed.
2 Keyboard for numerical input is displayed and cursor is displayed simultaneously.
The key board display position chanegs by the position of numerical value touched.
(At the time of numerical input, displayed in the position which will not interrupt the inputting.)
3 Input numeric with keyboard.
• to Key : Input the numeric.
• Key : Touching the key completes numeric input and closes the keyboard.
• Key : Touching the key cancels numeric input and closes the keyboard.
• Key : Moves the cursor to the right or left side.
Available only if any selectable item is at the right/left side of the cursor.
• Key : key is used when canceling the input by 1 character.
• key and the key which is not mentioned do not function.
4 If key is touched, numeric input is completed and keyboard is closed.
5
Keyboard
Cursor
To Next Page
Loading...
