11 - 47
11.13 Backup/Restore Settings
11.13.3 Backup/restoration setting operation
3 Max. number of backup data
1 Touch the setting item, and then a
keyboard appears.
Input values with the keyboard.
Setting range: 0 to 50, Default: 10
(When 0 is specified, the GOT does not
check the number of backup data to be
stored.)
2 Touch the button, and then the
setting is reflected.
3 Touch the button without touching the
button, and then the dialog box
shown left is displayed.
4 After all settings in the backup/restoration
setting are completed, end the backup/
restoration setting and GOT setup with
touching the button, and then the
settings are reflected.
To Next Page
Loading...
