13 - 112
13.12 GOT Data Package Acquisition
13.12.4 GOT data package acquisition operation
Processing time reference
The time required for the processing depends on conditions such as OS, data
capacity, and file structure.
(Reference values)
• When the capacity is 4 Mbytes: Around 6 seconds
• When the capacity is 12 Mbytes: Around 18 seconds
2 Precautions for operation
(1) Copying project data
If the Boot source drive and copy destination drive for project data is the same, the project data
cannot be copied.
If the drives are the same, cancel the setup.
(2) When project data are copied to the GOT
If OS or project data is copied to the GOT using the memory card created with GOT data package
acquisition, the utility setting is also copied.
Check each utility setting after copying to the GOT and change the setting according to need.
(3) Memory card to be used
When performing GOT data package acquisition, do not store other data to the memory card.
If doing so, the previous data will be unavailable.
(Example: Dialog box after touching the button)
2 The display depends on the status of copy
destination and setup.
Operate with following the displayed
dialog box.
3 After copying OS and data, the dialog box
for notifying the completion appears.
Touching the button closes the
dialog box.
Copy
To Next Page
Loading...
