14 - 2
14.1 Debug
14.1.1 The Debug function
*1: CC-Link IE Field Network is not compatible.
Network monitor
The network status of the MELSECNET/H, MELSECNET/10,
MELSECNET(II), CC-Link IE Controller Network, and CC-Link IE
Field Network can be monitored.
*1
Motion monitor
The servo monitoring and parameter settings of the motion
controller CPU (Q series) are available.
Servo amplifier monitor
Various monitor functions, parameter change, test operation, etc.
of the servo amplifier are available.
CNC monitor
Functions equivalent to the MELDAS dedicated display, such as
Position Display Monitor, Alarm Diagnosis Monitor, Tool Offset/
Param, and Program Monitor, are available.
Backup/restoration
Executing backups, executing restorations, and deleting backup
data are possible.
CNC Data I/O
Machining programs, parameters, and others of the CNC
connected to the GOT can be copied or deleted.
SFC Monitor
The GOT can monitor and display SFC programs of the PLC CPU
in the SFC diagram format (MELSAP3 or MELSAP-L format).
Ladder editor The sequence program of PLC CPU can be edited.
Motion SFC monitor
The motion SFC program and devices in the motion controller
CPU (Q series) can be monitored.
Item Description
Compatible
GT
Designer2
Compatible
GT Works3
To Next Page
Loading...
