14.7 I/O Check
14.7.3 I/O Check Operation
14 - 21
9
UTILITY FUNCTION
10
COMMUNICATION
INTERFACE
SETTING
11
DISPLAY AND
OPERATION
SETTINGS
12
CLOCK SETTINGS
AND BATTERY
STATUS DISPLAY
13
FILE DISPLAY AND
COPY
14
GOT SELF CHECK
15
CLEANING OF
DISPLAY SECTION
16
MAINTENANCE
TIME NOTIFICATION
SETTING
4 When the all checks ended normally, the dialog shown right
is displayed. And the GOT restarts in five seconds.
5 When an error occurs, the dialog that shows the GOT
abnormal termination and the byte with the error appears,
and then the GOT restarts in five seconds.
When the dialog shown right appears, check the following.
• Check if the hardware has no problems.
( 20. TROUBLESHOOTING)
To Next Page
Loading...
