14.8 NETWK Unit Status Display
14.8.3 Display example of the NETWK unit status display
14 - 25
9
UTILITY FUNCTION
10
COMMUNICATION
INTERFACE
SETTING
11
DISPLAY AND
OPERATION
SETTINGS
12
CLOCK SETTINGS
AND BATTERY
STATUS DISPLAY
13
FILE DISPLAY AND
COPY
14
GOT SELF CHECK
15
CLEANING OF
DISPLAY SECTION
16
MAINTENANCE
TIME NOTIFICATION
SETTING
(3) Data link information
Displays the MELSECNET/H communication unit data link information (communication status,
cause of communication suspension, cause of communication stop).
(4) Transient status
Displays the number of transient transmission errors and the error code.
No. Item Description
(d) Com Status
Displays the communication status of the host.
D-Link in prog. : FData link being executed
D-Link Stop(A)ss : Cyclic transmission stopped from other station
D-Link Stop (H) : Cyclic transmission stopped by host
B-Pass exec (No Area) : Host B/W send no allocation
B-Pass exec (Param Err) : Error in host parameters
B-Pass exec (Param unreceived) : Common parameters not received
Disconnect (No B-Pass) : Station numbers duplicated, cable not connected
Disconnect (Line Err) : Cable not connected
Testing : Testing online/offline
Reset. in prgr. : Hardware failure
(e)s Cause of Ssp
Displays the cause of disabled communication (transient transmission) of the host.
Normal Comm : Communicating normally
Offline : Offline
Offline test : Testing offline
Initialize : Error (error code: F101, F102, F105)
Change Ctrl Sta : Error (error code: F104, F106)
Testing Online : FError (error code: F103, F109, F10A)
Baton Missing : Error (error code: F107)
Baton Duplicated : Error (error code: F108)
Dup Sta No : Error (error code: F10B)
Dup Ctrl Sta : Error (error code: F10C)
Rcv Retry Err : Error (error code: F10E)
Send Retry Err : Error (error code: F10F)
Time Out Err : Error (error code: F110)
Abnormal Line : Error (error code: F112)
Disconnection : Error (error code: F11B)
No Own Sta Baton : Error (error code: F11F)
Other (error code) : Error (error code: displayed)
(f) Cause of Stop
Displays the cause of disabled data link (cyclic transmission) of the host.
Normal : Communicating normally
StopOrder : Cyclic transmission of all stations stopped from
host or other station
No Shared Param : Parameters cannot be received
Bad Shared Param : Set parameter error
Bad Self Sta CPU : A medium/critical error occurred in the host CPU
Com Aborted : Host data link error occurred
No. Item Description
(g) Transmission Err Displays the number of transient transmission errors.
(h) ErrCode
For other than the
GT155
Error histories of 16 errors are
displayed in 16 lows from the
latest.
For the GT155
Only the latest error history is
displayed as only a single low is
provided.
To Next Page
Loading...
