Mitsubishi GOT1000 GT15 - Page 453

14.11 Operator Information Management
14.11.1 Operator management
14 - 41
9
UTILITY FUNCTION
10
COMMUNICATION INTERFACE SETTING
11
DISPLAY AND OPERATION SETTINGS
12
CLOCK SETTINGS AND BATTERY STATUS DISPLAY
13
FILE DISPLAY AND COPY
14
GOT SELF CHECK
15
CLEANING OF DISPLAY SECTION
16
MAINTENANCE TIME NOTIFICATION SETTING
(2) Operator information edit screen
Touch the button or touch the button with the operator information selected on the
Operator information management screen, and then the Operator information edit screen is
displayed.
The operator information can be edited.
*1 Since the key window is for hexadecimal format, the setting range can be input in the range of A to F or 0 to 9.
No. Item Description
(b) ID Displays operator IDs.
(c) Level Displays security levels for operators.
(d) Update Displays the last updated dates of the operator information.
(e) Operation keys Execution keys for each function
(f) Drive in use
Displays and sets the storage location for imported and exported operator
information.
To switch the drive, touch the key. (A: Built-in CF card/B: Extended memory card/
E: USB drive)
Only when the extended memory card or the USB drive is installed on the GOT,
the user can switch the drive.
No. Item Description
(a) Operator Name
The operator name to be edited is displayed or input an operator name to be
added. (Up to 16 alphanumeric characters)
(b) Operator ID
The operator ID to be edited is displayed or input an operator name to be added.
(Setting range: 1 to 32766, Maximum number of registrations: 255)
(c) Level
The operator security level to be edited is displayed or input an operator security
level to be added. (0 to 15)
(d) Password Input a password.
(e)
Make a permanent
password
Switches the setting of the item disabled and enabled.
( : Disabled : Enabled)
(f) Use ext. auth. ID
Switches whether to use the external authentication ID.
( : Not Used : Used)
(g) Ext.auth. ID
The external authentication ID is displayed or input an external authentication ID.
(Fingerprint authentication ID setting range: numbers 1 to 7 digits,
External authentication ID setting range: alphanumerics 4 to 32 digits)
14.11.3
Function setting
Add
Edit
(a)
(b)
(c)
(d)
(e)
(f)
(g)