Mitsubishi GOT1000 GT15 - Page 463

14.11 Operator Information Management
14.11.1 Operator management
14 - 51
9
UTILITY FUNCTION
10
COMMUNICATION INTERFACE SETTING
11
DISPLAY AND OPERATION SETTINGS
12
CLOCK SETTINGS AND BATTERY STATUS DISPLAY
13
FILE DISPLAY AND COPY
14
GOT SELF CHECK
15
CLEANING OF DISPLAY SECTION
16
MAINTENANCE TIME NOTIFICATION SETTING
(6) Export operation
Export the operator information stored in the GOT to a memory card.
1 Touch the button.
2 The dialog box on the left is displayed.
Touch the following buttons according to
the output format for the file.
• Binary file : button
• CSV file : button
3 The dialog box shown left is displayed.
Touch button, and then the Admin
password authentication screen is
displayed. Input the administrator
password.
Character types to be input can be
changed with touching the following
buttons.
Alphabet capital
Alphabet small letter
Numeric
When the input is completed, touch the
key.
4 When the administrator password is
correctly input, the dialog box shown left is
displayed and the operator information
stored in the GOT is exported to a memory
card.
Export
Binary
CSV
OK
A-Z
a-z
0-9
Enter