20 - 12
20.1 GOT Restoration Sheet
3 System configuration check sheet
Fill in the brackets with the unit/module name.
(Continued to next page)
(1) System configuration of the GOT
(a) GOT main unit [ ]
(b) Option function board Used [ ]
Not used
(c) Communication interface
Communication
unit
[ ]
GOT built-in interface
(d) Option unit Used [ ]
Not used
(e) Cable between the PLC and GOT [ ]
(f) Cable length [ m]
(g) If any other unit etc. is used, please describe it.
(2) System configuration of the PLC
(a) Power supply module [ ]
(b) CPU module [ ]
(c) Serial communication module/
computer link module
Used [ ]
Not used
(d) Network module Used [ ]
Not used
(e) Interrupt module Used [ ]
Not used
(f) Positioning module Used [ ]
Not used
(g) Number of extension stages [ stages]
(h) If any other module etc. is used, please describe it.
To Next Page
Loading...
