Mitsubishi GOT1000 GT15 - Page 581

Appendix 6 List of Functions Added by GT Designer2 Version Upgrade
(For GOT1000 Series)
App - 27
17
ADDITION TIMES RESET FOR MAINTENANCE TIME NOTIFICATION
18
INSTALLATION OF COREOS, BOOTOS AND STANDARD MONITOR OS
19
MAINTENANCE AND INSPECTION
20
TROUBLESHOOTING
APPENDICESINDEX
*1 This item is supported by GT Works3 Version1.14Q or later.
(2) For GT15, GT SoftGOT1000, and GT11
Item Description
Version of GT
Designer2
Version of OS
Servo amplifier
connection
Supporting connection to servo amplifier 2.90U
Communication driver
MELSERVO-J3, J2S/M [04.02.**]
Supporting connection to MR-J2S-*CL 2.96A
Communication driver
MELSERVO-J3, J2S/M [04.04.**]
CNC connection
(MELDAS C6/C64)
Supporting connection to CNC (MELDAS C6/C64 series) 2.90U
Communication driver
AJ71QC24, MELDAS C6* [04.02.**]
MELSECNET/H [04.02.**]
CC-Link Ver2 (ID) [04.02.**]
Ethernet(MELSEC), Q17nNC,
CRnD-700 [04.02.**]
GOT multidrop
connection
Supporting the GOT multidrop connection *1 -
Barcode reader
connection
Supporting connection to barcode reader 2.90U
Extended function OS
Barcode [04.02.**]
Printer connection Supporting connection to printer 2.90U
Extended function OS
Printer [04.02.**]
FA transparent
Supporting the FA transparent function via USB 2.90U Standard monitor OS [04.02.**]
Supporting the Ethernet connection between the GOT and
the PLC on GX Developer
2.96A Standard monitor OS [04.04.**]
External I/O device
connection
Supporting connection to external I/O devices 2.90U
Extended function OS
External I/O / Operation Panel
[04.02.**]
RFID connection Supporting connection to the RFID controller 2.90U
Extended function OS
RFID [04.02.**]
Item Description
Version of
GT
Designer2
Version of OS
GT
15
GT Soft
GOT1000
GT11
Bus
Serial
Bus connection
Supporting connection to BUS
2.04E
Communication driver
Bus(Q)[01.00.**]
Bus(A/QnA) [01.00.**]
2.58L
GT15
Communication driver
Bus(Q) [03.03.**]
Bus(A/QnA) [03.03.**]
GT11
BootOS [03.03.**.P]
Standard monitor OS [03.03.**]
Communication driver
Bus(Q) [03.03.**]
Bus(A/QnA) [03.03.**]
Supporting connection to Q172HCPU,
Q173HCPU
2.09K
Communication driver
Bus(Q) [01.02.**]
Priority order of data load can be set. 2.43V
Communication driver
Bus connection Q [03.01.**]
Supporting connection to Universal model
QCPU
2.63R
Communication driver
Bus connection Q [03.07.**]Supporting connection to Q17nDCPU
Supporting connection to CNC C70
(Continued to next page)