Mitsubishi GOT1000 GT15 - Page 589

Appendix 6 List of Functions Added by GT Designer2 Version Upgrade
(For GOT1000 Series)
App - 35
17
ADDITION TIMES RESET FOR MAINTENANCE TIME NOTIFICATION
18
INSTALLATION OF COREOS, BOOTOS AND STANDARD MONITOR OS
19
MAINTENANCE AND INSPECTION
20
TROUBLESHOOTING
APPENDICESINDEX
Item Description
Version of
GT
Designer2
Version of OS
GT
15
GT Soft
GOT1000
GT11
Bus
Serial
ALLEN-
BRADLEY PLC
connection
Can use L device by MicroLogix 1000/
1200/1500 series
2.18U
Communication driver
AB MicroLogix [02.02.**]
Supporting connection to Control/
CompactLogix
2.58L
Communication driver
AB Control/CompactLogix
[03.03.**]
Supporting the Ethernet connection 2.63R
Communication driver
EtherNet/IP(AB)[03.07.**]
GE PLC
connection
Supporting connection to GE PLC 2.82L
Communication driver
GE Fanuc Automation(SNP-X)
[03.13.**]
LS IS PLC
connection
Supporting connection to LS IS PLC 2.90U
Communication driver
LS Industrial Systems
MASTER-K [04.02.**]
SCHNEIDER
PLC connection
Supporting connection to the
MODBUS /TCP
2.73B
Communication driver
MODBUS/TCP [03.09.**]
SIEMENS PLC
connection
Supporting connection to SIEMENS S7-
200 series
2.18U
Communication driver
SIEMENS S7-200 [02.02.**]
Microcomputer
connection
Supporting XON/XOFF control
2.32J
Communication driver
Computer [03.00.**]
Supporting interrupt extension
MODBUS /RTU
connection
Supporting MODBUS /RTU connection
2.96A
Communication driver
MODBUS/RTU [04.04.**]
MODBUS /TCP
connection
Supporting MODBUS /TCP connection
2.73B
Communication driver
MODBUS/TCP [03.09.**]
OMRON
temperature
controller
connection
Supporting connection to OMRON
temperature controller
2.18U
Communication driver
OMRON THERMAC / INPANEL
NEO [02.02.**]
The functions to automatically stop
monitoring faulty stations and to
disconnect communications with
controllers are added.
2.58L
Communication driver
OMRON THERMAC/INPANEL
NEO [03.03.**]
SHINKO
indicating
controller
connection
Supporting connection to SHINKO
indicating controller
2.43V
Communication driver
Shinko Technos Controller
[03.01.**]
The functions to automatically stop
monitoring faulty stations and to
disconnect communications with
controllers are added
2.58L
Communication driver
Shinko Technos Controller
[03.03.**]
CHINO controller
connection
Supporting connection to CHINO
controller
2.58L
Communication driver
CHINO Controllers(MODBUS)
[03.03.**]
The functions to automatically stop
monitoring faulty stations and to
disconnect communications with
controllers are added
(Continued to next page)