App - 52
Appendix 6 List of Functions Added by GT Designer2 Version Upgrade
(For GOT1000 Series)
5 Other functions added
(1) For GT16
(2) For GT15, GT SoftGOT1000, and GT11
Item Description
Version of GT
Designer2
Version of OS
Other function
All GT15 functions added by GT Designer2 Version2.90U or
earlier are available.
2.90U Standard monitor OS [04.02.**]
Q motion monitor
function
Supporting Q170MCPU 2.96A
Option OS
Q motion monitor [04.04.**]
Backup/restore function
Enables setting the E drive for the storage location for the
backup data or backup setting.
2.90U
Extended function OS
Backup/Restore [04.02.**]
Supporting Q170MCPU 2.96A
Extended function OS
Backup/Restore [04.04.**]
CNC data I/O function
Enables specifying the E drive for the target to input or
output the CNC data.
2.90U
Extended function OS
CNC Data I/O [04.02.**]
Cycle monitor data can be input and output 2.96A
Extended function OS
CNC Data I/O [04.04.**]
Ladder editor
Function to edit the sequence program stored in the
controller by using the GOT
2.96A
Extended function OS
GOT Platform Library [04.04.**]
Option OS
Ladder editor [04.04.**]
GOT Function Expansion Library
[04.04.**]
Multi-channel function
Supporting connection to multiple controllers on the
Ethernet network
2.90U
Standard monitor OS [04.02.**]
Communication driver
Use the communication driver,
[04.02.**] or later for each
connection.
Tag import function
Function to import a tag file created by the third party
programming software to GT Designer2, and set a tag as a
device.
2.91V Standard monitor OS [04.03.**]
OS installation
The A drive and E drive are available for installing the OS at
power-on.
2.91V
Standard monitor OS [04.03.**]
BootOS [04.03.**]
Item Description
Version of GT
Designer2
Version of OS
GT
15
GT Soft
GOT1000
GT
11
Utility
Displays details in OS information, project
information, alarm information, hard copy
information and advance recipe
information properties.
2.18U Standard monitor OS [02.02.**]
Network unit
status display
Function to display the status of
MELSECNET/H communication unit and
CC-Link communication unit
2.32J Standard monitor OS [03.00.**]
GOT data package
acquisition
Function for copying the installed OS or
data in the GOT main unit to the memory
card
2.43V
Standard monitor OS [03.01.**]
BootOS [03.01.**.M]
(Continued to next page)
To Next Page
Loading...
