3 - 4
3.2 Performance Specifications
3.2.1 GT1595-X
Item
Specifications
GT1595-XTBA GT1595-XTBD
Human
sensor
Detection length 1(39.37) [m](inch)
Detection range Left/Right/Top/Bottom: 70 degrees
Detection delay time 0 to 4s
Detection temperature Temperature difference between human body and ambient air: 4°C or higher
Memory
*4
C drive Built-in flash memory 9Mbytes (for storing project data and OS)
Life (Number of
write times)
100,000 times
Battery GT15-BAT lithium battery (Option)
Backup target Clock data and maintenance time notification data
Life Approx. 5 years (Operating ambiant temperature of 25°C)
Built-in
interface
RS-232
*6
RS-232, 1ch
Transmission speed: 115,200/57,600/38,400/19,200/9,600/4,800 bps
Connector shape: D-sub 9-pin (Male)
Application: For communicating with a controller or connecting a personal
computer (Project data read/write, OS installation, FA transparent function)
USB
USB (Full Speed 12Mbps), Device, 1ch
Connector shape: Mini-B
Application: For connecting a personal computer (Project data read/write, OS
installation, FA transparent function)
CF card
Compact flash slot, 1ch
Connector shape: TYPE I
Application: Data transfer, data storage, GOT startup
When formatting a CF card to FAT16: Up to 2GB
When formatting a CF card to FAT32: Not available
Option function board For option function board mounting, 1ch
Multi-color display board For multi-color display board mounting, 1ch
Extension unit
*6
For communication unit/option unit mounting, 2ch
Buzzer output Single tone (tone length adjustable)
Protective structure
Outside the enclosure: IP67
*5
Inside the enclosure: IP2X
External dimensions
(Excluding USB environmental
protection cover)
397(15.6)(W) 296(11.7)(H) 61(2.40)(D)[mm](inch)
Panel cutting dimensions 383.5(15.1)(W) 282.5(11.1)(H)[mm](inch)
Weight 5.0kg(11.0lb) (mounting fixtures are not included)
Compatible software package
GT Designer3 Version1.01B or later
GT Designer2 Version2.17T or later
GT Designer3 Version1.01B or later
GT Designer2 Version2.32J or later
To Next Page
Loading...
