4 - 2
4.1 Part Names and Settings of the GT1595
*1 For the multi-color display board, refer to the following.
3.2.1 GT1595-X
Connector used for the RS-232 interface
The specification of the cconnector used for the RS-232 interface of GT1595 is as
follows.
No. Name Description
1) POWER LED
Lit in green : Power is correctly supplied
Lit in orange : Screen saving
Blinks in orange/green : Blown back light bulb
Not lit : Power is not supplied
2) Display screen Displays the Utility and the user creation screen.
3) Touch key For operating the touch switches in the Utility and the user creation screen
4) USB interface
For connecting a personal computer
(Connector type: TYPE Mini-B)
5) RS-232 interface
For communicating with a controller or connecting a personal computer
(Connector type: D sub 9-pin)
6) Power terminal Power input terminal, LG terminal, FG terminal
7) Extension interface For installing an extension unit
8) CF card interface For installing a CF card
9) CF card access LED
Lit : CF card accessed
Not lit: CF card not accessed
10) CF card access switch
Used for stopping the access to the CF card before removing the CF card from the
GOT
ON : CF card being accessed (CF card removal prohibited)
OFF : CF card not accessed (CF card removal possible)
11)
Optional function board
interface
For installing the optional function board
12)
Multi-color display board
interface
*1
For installing the multi-color display board
13) Reset switch
Hardware reset switch
(Inoperative in the bus connection or with the bus connection unit installed)
14) Hole for unit installation fitting Hole for inserting the unit installation fitting
15) Battery holder Houses the battery.
16) Human sensor Sensor that detects human movement
17) Installation switch Used for OS installations at the GOT startup
Manufacturer :DDK Ltd.
Mode name :17LE-23090-27 (D4CK) or equivalent product
To Next Page
Loading...
