Motala MC2000 - Adjustment; Loosen the screws

Threshold – Installation instruction
© 2013 Motala Hissar AB 1 (3) IQ65-13 Rev: -
TABLE OF CONTENTS
1 GENERAL .................................................................................................................1
1.1 RELATED DOCUMENTS ................................................................................1
2 SAFETY .....................................................................................................................1
3 ADJUSTMENT METHOD ..........................................................................................1
3.1 ADJUSTMENT .....................................................................................................1
3.1.1 LOOSEN THE SCREWS ..............................................................................1
3.1.2 LOAD THE PLATFORM ...............................................................................2
3.1.3 TIGHTEN SCREWS ....................................................................................2
3.1.4 TEST FOR VIBRATIONS .............................................................................3
4 APPROVALS AND VERSION HISTORY .................................................................3
1 GENERAL
This instruction is used to avoid vibrations on the platform.
1.1 RELATED DOCUMENTS
This instruction is to be used with the MC2000 installation instruction.
2 SAFETY
Personal safety precautions for fitters.
Always use Personal Protective Equipment (PPE). Always use Head protection, Eye protection,
Foot protection, Hand protection, Protective clothing, Face shield and Safety harness.
Follow the safety precautions in the MC2000 installation instruction.
3 ADJUSTMENT METHOD
3.1 Adjustment
3.1.1 Loosen the screws
Slightly loosen the screws to the
gliding shoes on both left and right
side of the platform.