5 - 186 WiNG 5.5 Access Point System Reference Guide
Figure 5-117 Certificate Management - Generate RSA Key screen
5. Define the following configuration parameters required to generate a key:
6. Select OK to generate the RSA key. Select Cancel to revert the screen to its last saved configuration.
7. To optionally import a CA certificate, select the Import button from the RSA Keys screen.
Figure 5-118 Certificate Management - Import New RSA Key screen
8. Define the following configuration parameters required to import a RSA key:
Key Name Enter the 32 character maximum name assigned to the RSA key.
Key Size Use the spinner control to set the size of the key (from 1,024 - 2,048 bits). Motorola
Solutions recommends leaving this value at the default setting of 1024 to ensure optimum
functionality.
Key Name Enter the 32 character maximum name assigned to the RSA key
To Next Page
Loading...
