5 - 274 WiNG 5.5 Access Point System Reference Guide
To include a hostnames in DHCP request:
1. Select Devices from the Configuration tab.
2. Select Device Overrides from the Device menu to expand it into sub menu options.
3. Select a target device from the device browser in the lower, left-hand side of the UI.
4. Select Network to expand its sub menu options.
5. Select Miscellaneous.
Figure 5-171 Device Overrides - Network Miscellaneous screen
6. Select the Include Hostname in DHCP Request option to include a hostname in a DHCP lease for a requesting device.
This feature is enabled by default.
7. Select the DHCP Persistent Lease option to retain the last DHCP lease used across a reboot if the access point’s
designated DHCP server is unavailable. This feature is enabled by default.
8. Select the OK button to save the changes and overrides. Select Reset to revert to the last saved configuration.
NOTE: A blue override icon (to the left of a parameter) defines the parameter as having
an override applied. To remove an override, go to the Basic Configuration screen’s Device
Overrides field and select Clear Overrides. This will remove all overrides from the
device.
To Next Page
Loading...
