Device Configuration 5 - 283
device’s deployed environment. However, in doing so this device must now be managed separately from the profile
configuration shared by other identical models within the network.
For more information on applying an override to an existing device profile, refer to the following sections:
• Overriding General Security Settings
• Overriding a Certificate Revocation List (CRL) Configuration
• Overriding a Profile’s NAT Configuration
5.4.5.5.1 Overriding VPN Configuration using Wizards
Overriding a Security Configuration
VPN can be overridden by using either the inbuilt wizards or by manually configuring the required parameters. This section
describes how to use the inbuilt wizards to override the VPN parameters. The user interface provides two (2) wizards that
provide different levels of configuration. The following screen displays:
Figure 5-177 Security Configuration Wizard screen
The following options are available:
• Quick Setup Wizard – Use this wizard to setup basic VPN Tunnel on the device. This wizard is aimed at novice users and
enables them to setup a basic VPN with minimum effort. This wizard uses default values for most of the parameters.
• Step By Step Wizard – Use this wizard to setup a VPN Tunnel step by step. This wizard is aimed at intermediate users
who require the ability to customize some of the parameters.
• Advanced Configuration – Use this option to configure the VPN parameters manually.
Click the Start button to display the next screen for the wizards or when Advanced Configuration is selected, to display the
VPN screen.
To Next Page
Loading...
