5 - 284 WiNG 5.5 Access Point System Reference Guide
5.4.5.5.2 Quick Setup Wizard
Overriding General Security Settings
The Quick Setup Wizard creates a VPN connection with minimum manual configuration. Default values are retained for most
of the parameters.
Figure 5-178 VPN Quick Setup Wizard
1. Provide the following information to configure a VPN tunnel:
Tunnel Name Provide a name for the tunnel. Tunnel name must be such that it easily identifies the tunnel
uniquely.
Tunnel Type Configure the tunnel type as one of the following:
• Site-to-Site – Provides a secured connection between two sites
• Remote Access – Provides access to a network to remote devices.
To Next Page
Loading...
