Device Configuration 5 - 307
Figure 5-198 Device Overrides - VRRP screen - Version tab
VRRP version 3 (RFC 5798) and 2 (RFC 3768) are selectable to set the router redundancy. Version 3 supports sub-second
(centisecond) VRRP failover and support services over virtual IP. For more information on the VRRP protocol specifications
(available publicly) refer to http://www.ietf.org/rfc/rfc3768.txt (version 2) and http://www.ietf.org/rfc/rfc5798.txt (version
3).
7. From within the VRRP tab, select Add to create a new VRRP configuration or Edit to modify the attributes of an existing
VRRP configuration. If necessary, existing VRRP configurations can be selected and permanently removed by selecting
Delete.
If adding or editing a VRRP configuration, the following screen displays:
To Next Page
Loading...
