Network configuration 7 - 25
Figure 7-15 AAA TACACS Policy - Authentication tab
7. Refer to the following AAA TACACS policy authentication details.
8. Select an existing AAA TACACS server ID from the table and select Edit, or select Add to create a new policy.
Server Id Displays the numerical server index (1-2) for the authentication server when added to the
list available to the access point.
Host Displays the IP address or hostname of the AAA TACACS authentication server.
Port Displays the port on which the TACACS authentication server listens to traffic within the
access point managed network. The port range is 1 - 65,535. The default port is 49.
Request Timeout Displays the time (from 1 - 60 seconds) for the access point’s re-transmission of request
packets. The default is 3 seconds. If this time is exceeded, the authentication session is
terminated.
Request Attempts Displays the number of attempts a client can retransmit a missed frame to the RADIUS
server before it times out of the authentication session. The available range is from 1 - 10.
The default is 3.
To Next Page
Loading...
