Motorola XPR 5550 User Manual

Receiving and Responding to a Group Call
To receive a call from a group of users, your radio
must be configured as part of that group.
When you receive a Group Call (while on the Home
screen), the LED blinks green.The Group Call icon
appears in the top right corner. The first text line
shows the caller alias. The second text line displays
the group call alias. Your radio unmutes and the
incoming call sounds through the radio's speaker.
1 Hold the microphone 1 to 2 inches (2.5 to 5.0 cm)
from your mouth.
The LED lights up solid green.
2 Wait for one of the Talk Permit Tone to finish (if
enabled), and speak clearly into the microphone.
3 Release the PTT button to listen.
If there is no voice activity for a predetermined
period of time, the call ends.
Note:
See Making a Group Call on page 167 for
details on making a Group Call.
Receiving and Responding to a Private Call
A Private Call is a call from an individual radio to
another individual radio.
When you receive a Private Call, the LED blinks
green. The first line of the display shows the
subscriber alias or ID, and the RSSI icon. The second
line displays Private Call and the Private Call icon.
Your radio unmutes and the incoming call sounds
through the speaker of the radio.
1 Hold the microphone 1 to 2 inches (2.5 to 5.0 cm)
from your mouth.
2 Press the PTT button to respond to the call.
The LED lights up solid green.
3 Wait for the Talk Permit Tone to finish (if enabled),
and speak clearly into the microphone.
4 Release the PTT button to listen.
If there is no voice activity for a predetermined period
of time, the call ends.
The display shows Call Ended.
Making and Receiving Calls in Connect Plus Mode
164
English

Motorola XPR 5550 Specifications

General

GPS	Yes
Bluetooth	Yes
IP Rating	IP54
Operating Temperature	-30°C to +60°C
Frequency Range	VHF: 136-174 MHz, UHF: 403-470 MHz
Weight	1.8 kg (4.0 lbs)
Display	Yes, Alphanumeric
Digital Protocol	DMR
Encryption	AES/DES Encryption
Channel Capacity	1000 channels