Motorola XPR 5550

4
Press or to the selected network
access point and press to select.
5
Press or to Remove and press to
select.
6
Press or to Yes and press to
select.
The radio displays
to indicate that the
selected network access point is successfully
removed.
Utilities
This chapter explains the operations of the utility
functions available in your radio.
Squelch Levels
You can adjust the squelch level to filter out
unwanted calls with low signal strength or channels
with a higher than normal background noise.
Normal This is the default setting.
Tight This setting filters out unwanted calls
and/or background noise. Calls from
remote locations may also be filtered out.
Note:
This feature is not applicable in Citizens Band
channels that are in the same frequency.
Setting Squelch Levels
Follow the procedure to set the squelch levels on
your radio.
1 Do one of the following:
• Press the programmed Squelch button. Skip
the following steps.
•
Press to access the menu.
2
Press
or to Utilities. Press to
select.
3
Press
or to Radio Settings. Press
to select.
Other Systems
371
English