Motorola XPR 5550

• A tone sounds.
• The display shows a positive mini notice.
If unsuccessful:
• A tone sounds.
• The display shows a negative mini notice.
Note:
You can also manually select a target radio
address (see Forwarding Text Messages
by Using the Manual Dial on page 328).
Forwarding Text Messages by Using the Manual
Dial
Follow the procedure to forward text messages by
using the manual dial on your radio.
1
Press
or to Forward. Press to
select.
2
Press
to send the same message to another
subscriber or group alias or ID.
3
Press or to Manual Dial. Press
to select.
The display shows
Radio Number:.
4
Enter the subscriber ID, and press to
proceed.
The display shows a transitional mini notice,
confirming your message is being sent.
5 Wait for acknowledgment.
If successful:
• A tone sounds.
• The display shows a positive mini notice.
If unsuccessful:
• A tone sounds.
• The display shows a negative mini notice.
Editing Text Messages
Select Edit to edit the message.
Note:
If a subject line is present (for messages
received from an e-mail application), you
cannot edit it.
Other Systems
328
English