Motorola XPR 5550

5 Select the message recipient by
•
or to the required alias and press
to select.
•
or to Manual Dial, and press
to select. The first line of the display
shows Number:. The second line of the display
shows a blinking cursor. Key in the subscriber
alias or ID and press .
The display shows Sending Message, confirming
your message is being sent.
If the message is sent successfully, a tone sounds
and the display shows Message Sent.
If the message cannot be sent, a low tone sounds
and the display shows Message Send Failed.
If the text message cannot be sent, it is moved to
the Sent Items folder and marked with a Send
Failed icon.
Deleting a Saved Text Message from Drafts
1 Access the Text Message feature.
Radio Con-
trols
Steps
Programmed
Text Message
button
Press the programmed Text
Message button.
Menu
1
to access the menu.
2
or to Messages
and press to select.
2
or to Drafts and press to
select.
3
or to the required message and press
to select.
4
or to Delete and press to delete
the text message.
Advanced Features in Connect Plus Mode
204
English