Motorola XPR 5550 User Manual

Work
Group
This setting enables AF Suppressor
and disables AGC for use when a
group of radios are near to each other.
Setting Audio Ambience
Follow the procedure to set the audio ambience on
your radio according to your environment.
1
Press to access the menu.
2
Press
or to Utilities. Press to
select.
3
Press
or to Radio Settings. Press
to select.
4
Press or to Audio Ambience. Press
to select.
5
Press or to the required setting. Press
to select.
The settings are as follows.
•
Choose Default for the default factory
settings.
•
Choose Loud to increase speaker loudness
when using in noisy surroundings.
•
Choose Work Group to reduce acoustic
feedback when using with a group of radios
that are near to each other.
The display shows beside the selected setting.
Audio Profiles
You can customize the audio profiles for your radio
according to your preference.
Default This is the default setting.
Level 1, Level
2, and Level 3
These settings are intended to
compensate for noise-induced
hearing loss that is typical for
adults in their 40’s, 50’s, and 60’s
or over.
Treble Boost,
Mid Boost,
and Bass
Boost
These settings are intended for a
tinnier sound, a more nasal sound,
and a deeper sound.
Other Systems
388
English

Motorola XPR 5550 Specifications

General

GPS	Yes
Bluetooth	Yes
IP Rating	IP54
Operating Temperature	-30°C to +60°C
Frequency Range	VHF: 136-174 MHz, UHF: 403-470 MHz
Weight	1.8 kg (4.0 lbs)
Display	Yes, Alphanumeric
Digital Protocol	DMR
Encryption	AES/DES Encryption
Channel Capacity	1000 channels