5
Select Alarm List to revisit the Alarm list.
6 The tone sounds and the red LED blinks until you
exit the Emergency mode. However, the tone can
be silenced. Do one of the following:
• Press the PTT button to call the group of radios
which received the Emergency Alarm.
• Press any programmable button.
Responding to Emergency Alarms
When an Emergency Alarm is received, the recipient
may choose to either delete the alarm and exit the
Alarm List, or respond to the Emergency Alarm by
pressing the PTT button and transmitting non-
emergency voice. Follow the procedure to respond to
Emergency Alarms on your radio.
1 If the Emergency Alarm Indication is enabled, the
Emergency Alarm List appears when the radio
receives an Emergency Alarm. Press or
to the required alias or ID.
2 If the Channel Free Indication feature is enabled,
you hear a short alert tone the moment the
transmitting radio releases the PTT button,
indicating the channel is free for you to respond.
Press the PTT button to transmit non-emergency
voice to the same group the Emergency Alarm
targeted.
The green LED lights up.
3 Do one of the following:
• Wait for the Talk Permit Tone to end and speak
clearly into the microphone if enabled.
• Wait for the PTT Sidetone to end and speak
clearly into the microphone if enabled.
4 Release the PTT button to listen.
When the emergency initiating radio responds:
• The red LED blinks.
• The display shows the Emergency Call icon,
the Emergency Talkgroup ID or alias, and the
ID or alias of the transmitting radio.
Note:
If the Emergency Call Indication is not
enabled, the display shows the Group Call
icon, Emergency Talkgroup ID or alias, and
the ID or alias of the transmitting radio.
97
English
To Next Page
Loading...
Need help?
General
