Receiving Emergency Alarms
Follow the procedure to receive Emergency Alarms
on your radio.
When you receive an Emergency Alarm:
• A tone sounds.
• The red LED blinks.
• The display shows the Emergency icon, and the
Emergency caller alias or if there is more than one
alarm, all emergency caller aliases are displayed
in an Alarm List.
1 Do one of the following:
•
If only one alarm, press to view more
details.
•
If more than one alarm, press
or to
the required alias, and press to view
more details.
2
Press to view the action options.
3
Press and select Yes to exit the Alarm list.
4
Press to access the menu.
5
Select Alarm List to revisit the Alarm list.
6 The tone sounds and the LED blinks red until you
exit the Emergency mode. However, the tone can
be silenced. Do one of the following:
• Press the PTT button to call the group of radios
which received the Emergency Alarm.
• Press any programmable button.
• Exit Emergency mode. See Exiting Emergency
Mode After Receiving the Emergency Alarm on
page 319.
Responding to Emergency Alarms
Follow the procedure to respond to Emergency
Alarms on your radio.
1 Make sure the display shows the Alarm List. Press
or to the required alias or ID.
2
If the Channel Free Indication feature is
enabled, you hear a short alert tone the moment
the transmitting radio releases the PTT button,
318
English
To Next Page
Loading...
