Motorola XPR 5550 User Manual

subscriber aliases or IDs. Your radio must be
programmed to allow you to use this feature.
Sending Radio Checks
Follow the procedure to send radio checks on your
radio.
1 Press the programmed Radio Check button.
2
Press or to the required alias or ID.
Press to select.
The display shows a transitional mini notice,
indicating the request is in progress. The green
LED lights up.
Wait for acknowledgment.
If you press when the radio is waiting for
acknowledgment, a tone sounds, the radio terminates
all retries, and exits Radio Check mode.
If successful:
• A positive indicator tone sounds.
• The display shows a positive mini notice.
If unsuccessful:
• A negative indicator tone sounds.
• The display shows a negative mini notice.
The radio returns to the subscriber alias or ID screen.
Sending Radio Checks by Using the Manual Dial
Follow the procedure to send radio checks on your
radio by using the manual dial.
1
Press to access the menu.
2
Press or to Contacts. Press to
select.
3
Press or to Manual Dial. Press
to select.
4
Press or to Radio Number. Press
to select.
5 Do one of the following:
• Enter the subscriber alias or ID, and press
to proceed.
Other Systems
293
English

Motorola XPR 5550 Specifications

General

GPS	Yes
Bluetooth	Yes
IP Rating	IP54
Operating Temperature	-30°C to +60°C
Frequency Range	VHF: 136-174 MHz, UHF: 403-470 MHz
Weight	1.8 kg (4.0 lbs)
Display	Yes, Alphanumeric
Digital Protocol	DMR
Encryption	AES/DES Encryption
Channel Capacity	1000 channels