• Press the programmed One Touch Access
button.
2 Press the PTT button to make the call.
The green LED lights up. The first text line shows
the Group Call icon and alias.
3 Do one of the following:
• Wait for the Talk Permit Tone to end and speak
clearly into the microphone if enabled.
• Wait for the PTT Sidetone to end and speak
clearly into the microphone if enabled
4 Release the PTT button to listen.
The green LED lights up when the target radio
responds. The display shows the Group Call icon,
and alias or ID, and the transmitting radio alias or
ID.
5 If the Channel Free Indication feature is enabled,
you hear a short alert tone the moment the
transmitting radio releases the PTT button,
indicating the channel is free for you to respond.
Press the PTT button to respond to the call.
The call ends when there is no voice activity for a
predetermined period.
The call initiator can press
to end a Group
Call.
Making Group Calls by Using the Contacts List
Follow the procedure to make Group Calls on your
radio by using the Contacts list.
1
Press to access the menu.
2
Press or to Contacts. Press to
select.
3
Press or to the required alias or ID.
Press to select.
4 Hold the microphone 1 inch to 2 inches (2.5 cm to
5.0 cm) from your mouth.
5 Press the PTT button to make the call.
The green LED lights up.
The first line displays the subscriber alias or ID.
The second line displays Group Call and the
Group Call icon.
39
English
To Next Page
Loading...
