• The audio from the monitored radio starts
playing for a programmed duration, and the
display shows Rem. Monitor. Once the timer
expires, an alert tone sounds, and the LED
turns off.
If unsuccessful:
• A negative indicator tone sounds.
• The display shows a negative mini notice.
Initiating Remote Monitors by Using the Contacts
List
Follow the procedure to initiate Remote Monitor on
your radio by using the Contacts list.
1
Press to access the menu.
2
Press or to Contacts. Press to
select.
3
Press or to the required alias or ID.
Press to select.
4
Press or to Remote Mon.. Press
to select.
The display shows a transitional mini notice,
indicating the request is in progress. The green
LED lights up.
5 Wait for acknowledgment.
If successful:
• A positive indicator tone sounds.
• The display shows a positive mini notice.
• The audio from the monitored radio starts
playing for a programmed duration, and the
display shows Rem. Monitor. Once the timer
expires, an alert tone sounds, and the LED
turns off.
If unsuccessful:
• A negative indicator tone sounds.
• The display shows a negative mini notice.
77
English
To Next Page
Loading...
